Epever 30ah 24v pwm charge controller
Features:
.Three system voltage configuration : 12V, 24V or 12V/24V auto work
·High efficiency PWM charging with temperature compensation
·3 LEDs shows PV charging, battery and load status
·External temperature sensor interface
·RS-485 bus communication
·Open standard Modbus communication protocol
·Software update function
More powerful function via MT50 or PC
·Diversified load control modes : Manual, Light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and User type
·Real-time monitor
·Programmable parameters
·LVD or SOC load disconnect function
·Energy statistics function
Electronic Protections:
- ·PV short circuit
- ·PV reverse polarity
- ·Battery overcharge
- ·Battery over discharge
- ·Battery reverse polarity
- ·Load short circuit
- ·Load overload
- ·Overheating
Model Name | LS3024B |
Nominal System Voltage | 12 / 24V auto work |
Rated Battery Current | 30A |
Maximum battery voltage | 50V |
Grounding | Common positive |
Self-consumption | 8.4mA(12V),7.8mA(24V) |
Temp. compensation | -3mV/℃/2V(25℃ ref) |
Equalize charging voltage | Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V |
Boost charging voltage | Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V |
Float charging voltage | Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V |
Low voltage reconnect voltage | Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V |
Low voltage disconnect voltage | Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V |
Working temp. | -35℃~+55℃ |
Humidity | ≤95% (NC) |
Enclosure | IP30 |
Dimension | 200.6×101.3x57mm |
Terminal | Â 10mm2 |
Net weight | 0.5kg |
Reviews
There are no reviews yet.